HIKVISION DS-7600 Series

DS-7600 Series NVR User Manual
106
Network Detection
You can view the network traffic to obtain real-time information and connecting status of your NVR.
To view network traffic:
1. Enter the Network Detection menu by going to Menu > System Maintenance > Network Detection.
Figure 139, Traffic Detection
2. Select the Traffic tab and you can view the sending rate and receiving rate information on the interface, as shown in Figure 139. The
traffic data is refreshed every second.
To configure network detection:
1. Enter the Network Detection menu by going to Menu > Maintenance > Network Detection.
2. Select the Network Detection tab to enter the Network Detection menu, as shown in Figure 140.