HIKVISION DS-7600 Series

DS-7600 Series NVR User’s Manual
108
Figure 143, Network Settings Menu
To export network packet:
By connecting the NVR to network, the captured network data packet can be exported to a USB-flash disk, SATA CD-RW, or other local
backup device.
1. Enter the Network Detection menu by going to Menu > Maintenance > Network Detection.
2. Select the Network Detection tab to enter the Network Detection menu.
3. Click the Export button to start exporting.
Figure 144, Export Process Bar
4. After the exporting is complete, click OK to finish the packet export, as shown in Figure 144.
NOTE: Click the Refresh button if the connected local backup device cannot be displayed. If it fails to detect the backup
device, please check whether it is compatible with the NVR. Format the backup device if the format is incorrect.
To view network status:
1. Enter the Network Stat. menu by going to Menu > Maintenance > Network Detection.
2. Select the Network Stat. tab to enter the Network Stat. menu, as shown in Figure 145.