HIKVISION DS-7600 Series

DS-7600 Series NVR User Manual
32
Figure 35, Strong (Acceptable) Strength Password
Table 1, Password Strength Levels
Strength Level
Description
Level 0 (Risky)
NVRs will not accept a Level 0 password
Password length is fewer than eight characters, contains only one type of character,
is the same as the user name, and/or is the mirror writing of the user name. This type
of password
will not
be accepted.
Level 1 (Weak)
NVRs will accept a Level 1 password
Password contains two kinds of characters. The combination is number + lowercase
letter or number + uppercase letter, and the password length is at least eight
characters. This type of password
will
be accepted.
Level 2 (Medium/Fair)
NVRs will accept a Level 2 password
Password contains two types of characters. The combination is
neither
number +
lowercase letter nor number + uppercase letter, and the password length is at least
eight characters. This type of password
will
be accepted.
Level 3 (Strong)
NVRs
will
accept a Level 3 password
Password contains more than three types of characters, and the password length is at
least eight characters. This type of password
will
be accepted.
NOTES: Types of characters are lowercase letters, uppercase letters, numbers, and special characters. Only ASCII characters
are allowed.
The strength level indicator colors can vary by activation process, model number, and device type.