DS-7600 Series NVR User Manual
42
Figure 47, Digital Zoom
Image Settings
Set the image mode and image parameters like brightness, contrast, saturation, hue and so on for selected channel.
Figure 48, Image Settings Menu
1. Click the Image Settings icon for a selected channel. This will bring up the Image Settings menu, as shown Figure 48.
2. You can also adjust the image parameters like , , , hue , and sharpness by dragging the corresponding
icon. The affect will be displayed immediately on the screen.
3. Click the OK button to save the settings and back to the Live Feed mode.
4. You can also enter the Image setting menu by going to Menu > Cameras Setup > Image, as shown in Figure 49. The steps are similar
to the live feed icon setting steps.
To Next Page
Loading...
