DS-7600 Series NVR User Manual
45
Previous Screen/Next Screen: Click to view the previous/next set of display. In a 2 x 2 mode, this will show the next four display. In a 3 x
3 mode, this will show the next nine display.
Start/Stop Auto-Switch: Click to start/stop auto-switch. Auto-switch will cycle through selected cameras. Switching of camera can be
based on an individual or multiple cameras.
Start Recording: Click the Continues Record/Event Record item. This will bring up an attention box shown below. If you click yes, it will
start all-day continues/event recording of all channels.
To Next Page
Loading...
