DS-7600 Series NVR User Manual
54
Figure 63, Holiday Settings Menu
1. Enter the Holiday menu, shown in Figure 63 by going to Menu > Recording Configuration > Holiday.
Figure 64, Edit Holiday Recording Configuration Menu
2. Choose a holiday on the List show on the right. Click to pop up an Edit menu, as shown in Figure 64.
3. Edit the Holiday Name or use the default.
4. Check the Enable checkbox.
5. Select Mode in the drop-down list. There are three different modes for the date format to configure the holiday schedule.
6. Set the start and end date.
7. Click the Apply button to save settings.
8. Click OK to exit.
To Next Page
Loading...
