DS-7600 Series NVR User Manual
61
Figure 72, Export Interface
14. If the available space on the storage device is adequate, select the Export button to begin backup of the selected clips.
15. After clips have been backed up, you may click the Cancel button to return to the Playback Interface.
NOTE: If the USB storage device has not been properly initialized and formatted, click on the Format button to do so.
Formatting a storage device will permanently delete ALL files on that device.
There is NO WARNING MESSAGE after clicking the Format button to format the storage device. Proceed with caution
and back up all critical data from the storage device before formatting.
Backing up Recorded Files
Not only can video clips be backed up, full recorded files can also be backed up to a storage medium. To back up recorded files:
1. Search for recorded files using the File Management menu (see Searching for Recorded Files on page 56).
2. Select the files you would like to back up by checking the box next to the file. You may also check the Channel No. box to select all
files. The total required space will be shown next to Total Size.
3. You can also check the Merge files to export checkbox.
4. Click the Export button to enter the Export menu, same as Figure 72.
5. In the Export menu, connect a USB storage device and click the Refresh button. If the device is detected, a list of its file contents as
well as the available free space will be shown.
6. You may delete files on the USB storage device to free up additional storage space by clicking the Delete button on the selected file.
You may also format the device by clicking the Format button. Formatting will remove ALL files from the device.
7. When there is sufficient storage space for backup, click the Export button. A backup progress bar will be shown.
Figure 73, Export Finished Message
8. Click the OK button once backup has completed.
9. Click the Cancel button to return to the File Management menu.
10. You can also click Quick Export in the Record menu to export all the record files for the selected channel.