User Manual of Digital Video Recorder
36
Figure 2. 8 Advanced Network Configuration
9. Set the parameters of port No., ezviz Cloud, Auto UPnP or DDNS if required.
10. Click Next button after configuring the advanced network parameters, which will take you to the HDD
Management window, shown in Figure 2. 9.
Figure 2. 9 HDD Management
11. To initialize the HDD, click the Init button. Initialization will remove all the data saved in the HDD.
12. Click Next button to enter the Record Settings window, as shown in Figure 2. 10.
Figure 2. 10 Record Settings
To Next Page
Loading...
Need help?
General