Network Video Recorder User Manual
1
Chapter 1 Basic Operation
1.1 Activate Your Device
1.1.1 Default User and IP Address
● Default administrator account: admin.
● Default IPv4 address: 192.168.1.64.
1.1.2 Activate via Local Menu
For the first-time access, you have to set an admin password to activate your device. No operation
is allowed before activation. You can also activate the device via web browser, SADP or client
software.
Steps
1. Enter the admin password twice.
Figure 1-1 Activate via Local Menu
To Next Page
Loading...
