EasyManua.ls Logo

HIKVISION DS-9608NI-I8 User Manual

HIKVISION DS-9608NI-I8
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Network Video Recorder
User Manual
UD04699B

Table of Contents

Other manuals for HIKVISION DS-9608NI-I8

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-9608NI-I8 and is the answer not in the manual?

HIKVISION DS-9608NI-I8 Specifications

General IconGeneral
ModelDS-9608NI-I8
CategoryNetwork Video Recorder
Video Input Channels8
Decoding FormatH.265+/H.265/H.264+/H.264
Max Recording Resolution12MP
Synchronous Playback8 Channels
Hard Disk InterfaceSATA
Outgoing Bandwidth256 Mbps
USB Interface2 × USB 2.0
Alarm In/Out16/4
Operating Humidity10% to 90%
Video OutputHDMI, VGA
HDMI Output Resolution4K (3840 × 2160) / 30Hz
VGA Output Resolution1920 × 1080
Audio Input1 channel (RCA)
Audio Output1 channel (RCA)
HDD Slots8
Max HDD Capacity10 TB per HDD
Total Max HDD Capacity80 TB
Network Interface1 × RJ45 10/100/1000 Mbps
Power Supply100 to 240 VAC, 50 to 60 Hz
Working Temperature-10°C to +55°C

Summary

Chapter 2 Getting Started

2.1 Device Startup and Activation

Guide to powering on, shutting down, and activating the NVR.

2.2 Using Wizard for Basic Configuration

Step-by-step guide to the initial setup wizard for network parameters.

2.3 Adding and Connecting the IP Cameras

Instructions on how to add and connect IP cameras to the NVR.

Chapter 4 PTZ Controls

4.1 Configuring PTZ Settings

Procedure to set up PTZ camera parameters.

4.2 Setting PTZ Presets, Patrols & Patterns

How to customize and manage PTZ camera movements.

Chapter 5 Recording and Capture Settings

5.1 Configuring Parameters

Define image quality, stream type, resolution for recording.

5.2 Configuring Recording and Capture Schedule

Set schedules for automatic recording and capture.

5.3 Configuring Motion Detection Recording and Capture

Set up motion detection parameters and actions.

5.4 Configuring Alarm Triggered Recording and Capture

Configure recording based on alarm inputs.

5.5 Configuring VCA Event Recording

Configure recording for Video Content Analysis events.

5.10 Files Protection

Lock recording files or set HDD to read-only for protection.

Chapter 6 Playback

6.1 Playing Back Record Files

Methods for searching and playing back recorded video files.

Chapter 8 Alarm Settings

8.1 Setting Motion Detection Alarm

Configure motion detection parameters and actions.

8.2 Setting Sensor Alarms

Configure handling actions for external sensor alarms.

8.3 Detecting Video Loss Alarm

Set up detection and response for video loss.

8.4 Detecting Video Tampering Alarm

Configure detection and response for video tampering.

8.6 Setting Alarm Response Actions

Define actions like audible warning or email notifications for alarms.

Chapter 10 VCA Alarm

10.1 Face Detection

Configure face detection settings and actions.

10.2 Vehicle Detection

Configure vehicle detection for traffic monitoring.

10.3 Line Crossing Detection

Detect objects crossing a virtual line.

10.4 Intrusion Detection

Detect objects entering or loitering in a predefined region.

10.5 Region Entrance Detection

Detect objects entering a predefined virtual region.

Chapter 11 VCA Search

11.1 Face Search

Search for detected face pictures and related video files.

11.2 Behavior Search

Search for suspicious behavior based on VCA detection.

11.3 Plate Search

Search for vehicle plate pictures and related information.

Chapter 12 Network Settings

Chapter 14 HDD Management

Chapter 18 Appendix

18.3 Troubleshooting

Common issues and their solutions for NVR operation.

Related product manuals