HIKVISION DS-9608NI-I8 User Manual

Network Video Recorder User Manual
154
8.3 Detecting Video Loss Alarm
Purpose:
Detect video loss of a channel and take alarm response action(s).
Step 1 Enter Video Loss interface of Camera Management and select a channel you want to detect.
Menu> Camera> Video Loss
Figure 8-9 Video Loss Setup Interface
Step 2 Set up handling action of video loss.
Check the checkbox of “Enable Video Loss Alarm”, and click button to set up handling
action of video loss.
Step 3 Set up arming schedule of the handling actions.
1) Select Arming Schedule tab to set the channel’s arming schedule.
2) Choose one day of a week and up to eight time periods can be set within each day.
3) Click Apply button to save the settings.
Time periods shall not be repeated or overlapped.

HIKVISION DS-9608NI-I8 Specifications

General

Model	DS-9608NI-I8
Category	Network Video Recorder
Video Input Channels	8
Decoding Format	H.265+/H.265/H.264+/H.264
Max Recording Resolution	12MP
Synchronous Playback	8 Channels
Hard Disk Interface	SATA
Outgoing Bandwidth	256 Mbps
USB Interface	2 × USB 2.0
Alarm In/Out	16/4
Operating Humidity	10% to 90%
Video Output	HDMI, VGA
HDMI Output Resolution	4K (3840 × 2160) / 30Hz
VGA Output Resolution	1920 × 1080
Audio Input	1 channel (RCA)
Audio Output	1 channel (RCA)
HDD Slots	8
Max HDD Capacity	10 TB per HDD
Total Max HDD Capacity	80 TB
Network Interface	1 × RJ45 10/100/1000 Mbps
Power Supply	100 to 240 VAC, 50 to 60 Hz
Working Temperature	-10°C to +55°C