Need help?Do you have a question about the HIKVISION DS-96128NI-I24 and is the answer not in the manual?
General| Audio system | 2-way |
|---|---|
| Input bandwidth | 576 Mbit/s |
| Output bandwidth | 512 Mbit/s |
| Maximum resolution | 4096 x 2160 pixels |
| Alarm input channels | 16 |
| Video input channels | 128 channels |
| Alarm output channels | 8 |
| Supported resolutions | 4096 x 2160, 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Video formats supported | H.264, H.264+, H.265, H.265+, M-JPEG, MPEG4 |
| Number of simultaneously playbacked channels | 16 channels |
| Audio RCA inputs | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 4 |
| Supported network protocols | IPv6, HTTPS, UPnP, SNMP, NTP, SADP, SMTP, NFS, iSCSI, PPPoE, DDNS |
| Product color | Black |
| Rack capacity | 4U |
| Rack mounting | Yes |
| RAID levels | 0, 1, 5, 10 |
| HDD capacity | - GB |
| HDD interface | SATA |
| Maximum storage capacity | 10 TB |
| Number of HDDs installed | 0 |
| Number of HDDs supported | 24 |
| AC input voltage | 100 - 240 V |
| Power consumption (typical) | 14 W |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Display type | LCD |
Weight and Dimensions| Depth | 528 mm |
|---|---|
| Width | 447 mm |
| Height | 172 mm |
| Weight | 23000 g |
Procedures for safely powering on, powering off, and rebooting the Network Video Recorder.
Steps to activate the NVR for the first time by setting an administrator password.
Step-by-step walkthrough of the initial NVR setup wizard for essential configurations.
Procedures for activating, adding, and configuring IP cameras to connect with the NVR.
Detailed explanation of functions and operations available within the Live View interface.
How to configure the necessary parameters for controlling PTZ (Pan, Tilt, Zoom) cameras.
Guide to setting up PTZ presets, patrols, and patterns for automated camera movements.
Overview of the PTZ control panel interface and its operational icons.
Detailed settings for video encoding, resolution, frame rate, and bitrate for recording.
How to set up custom recording schedules for continuous or event-triggered recording.
Steps to set up motion detection areas, sensitivity, and trigger actions for recording.
How to configure recording to start based on external alarm inputs.
Methods to protect recording files from being overwritten by locking or setting HDD to read-only.
Various methods for searching and playing back recorded video files.
Procedures for exporting recorded video and picture files to backup devices.
Setting up a hot spare device for automatic failover in case of primary device failure.
Configuring motion detection sensitivity, areas, and alarm response actions.
Configuring handling actions for external sensor alarms connected to the NVR.
Setting up alarms and response actions for video loss detection.
Configuring alarms for video tampering detection and setting response actions.
Managing NVR exceptions like HDD full, network disconnected, and illegal login.
Defining how the NVR responds to alarms, including event hints, monitoring, and notifications.
Configuring and setting up face detection for video analytics.
Setting up RAID arrays for data redundancy and storage.
Steps to initialize new hard disk drives before they can be used by the NVR.
Procedures for upgrading the NVR firmware via local backup or FTP server.
Common issues and solutions for NVR setup, connectivity, and operation problems.
To Next Page
