Need help?Do you have a question about the HIKVISION DS-9632NI-I16 and is the answer not in the manual?
General| Input bandwidth | 320 Mbit/s |
|---|---|
| Output bandwidth | 256 Mbit/s |
| Maximum resolution | 3840 x 2160 pixels |
| Alarm input channels | 16 |
| Video input channels | 32 channels |
| Alarm output channels | 8 |
| Supported resolutions | 3840 x 2160, 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Video recording modes | 1080p, 2160p |
| Video formats supported | H.264, H.264+, H.265, MPEG4 |
| Audio RCA inputs | 1 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Power over Ethernet (PoE) | Yes |
| Ethernet LAN (RJ-45) ports | 2 |
| Wi-Fi | No |
| HDD capacity | 0 GB |
| HDD interface | Serial ATA |
| Maximum storage capacity | 96 TB |
| Number of HDDs installed | 0 |
| Power supply | 300 W |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 45 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | Black |
| Rack capacity | 3U |
Weight and Dimensions| Depth | 496 mm |
|---|---|
| Width | 445 mm |
| Height | 146 mm |
| Weight | 12500 g |
Legal disclaimers and liability limitations for product use, including internet access risks.
Tips for safe connection and operation, including environment, liquids, and securing the unit.
Details alarm configurations for various events like video loss, tampering, and network issues.
Covers network interface types, PoE, IPv6 support, protocols, and remote access features.
Covers the procedures for starting up, shutting down, and activating the NVR device.
Details the process of activating the device by setting an admin password for first-time access.
Details the process of resetting the admin password using a GUID file.
Guides through basic NVR configuration using the setup wizard.
Explains how to activate IP cameras before adding them to the NVR.
Details how to add detected online IP cameras to the NVR connection list.
Details various functions available in live view mode, like single/multi-screen, auto-switch, and recording.
Guides on setting PTZ parameters for camera control before operation.
Details how to set preset locations, patrols, and patterns for PTZ cameras.
Explains how to set preset locations for PTZ cameras to point to during events.
Details how to set patrols for PTZ cameras, moving them to key points with set durations.
Describes how to record and set PTZ movement as a pattern for playback.
Explains how to define parameters affecting image quality, stream type, and resolution.
Details setting record and capture schedules for cameras.
Guides on setting motion detection parameters, areas, sensitivity, and response actions.
Explains how to configure recording or capture triggered by alarm inputs.
Details configuring recording triggered by VCA events like face detection and intrusion.
Explains enabling redundant recording to save data on both R/W and redundant HDDs.
Covers locking recording files and setting HDD property to Read-only.
Explains how to lock recording files to prevent overwriting.
Describes setting HDD property to Read-only to protect files from overwriting.
Covers playing back recorded video files of specific channels.
Explains instant playback of recorded video files for a specific channel.
Describes using smart playback to search video based on motion, line, or intrusion detection.
Explains how to play back files searched by event type like alarm or motion detection.
Covers backing up record files to various devices.
Explains how to quickly export record files to backup devices.
Details backing up record files using normal video or picture search.
Explains how to back up event-related record files using USB devices or SATA/eSATA HDD.
Explains setting up a hot spare device for data redundancy.
Explains how to set a device to work in Hot Spare Mode for redundancy.
Details setting a working device mode and enabling the hot spare function.
Guides on setting motion detection parameters, areas, sensitivity, and response actions.
Explains handling actions for external sensor alarms and setting arming schedules.
Details detecting video loss and setting up handling actions and arming schedules.
Explains detecting video tampering and setting up handling actions and arming schedules.
Covers handling various exceptions like HDD Full, Network Disconnected, and IP Conflict.
Details configuring alarm response actions like event hints and full screen monitoring.
Explains the face detection function to detect faces and trigger actions when an alarm is triggered.
Describes vehicle detection for traffic monitoring, license plate capture, and alarm signaling.
Explains detecting people, vehicles, or objects crossing a virtual line with directional settings.
Details intrusion detection for people or objects entering/loitering in a predefined virtual region.
Explains detecting people/vehicles entering a predefined virtual region from outside.
Describes detecting people/vehicles exiting a predefined virtual region.
Details detecting unattended objects left in a predefined region.
Explains detecting objects removed from a predefined region.
Covers detecting abnormal sounds like sudden increase/decrease in sound intensity.
Detects changes in the surveillance environment due to external factors or camera rotation.
Detects image blur caused by lens defocus and triggers actions.
Explains PIR alarms triggered by intruder movement and heat detection.
Describes searching for captured face pictures and related video files based on specified conditions.
Explains the necessity of initializing new HDDs before using them with the NVR.
Provides solutions for common issues like no image, audible warning, and disconnected cameras.
Addresses issues with no image displayed on the monitor after startup.
To Next Page
