Need help?Do you have a question about the HIKVISION DS-96256NI-I24 and is the answer not in the manual?
General| Model | DS-96256NI-I24 |
|---|---|
| Type | NVR |
| Channel Input | 256 |
| Max Incoming Bandwidth | 768 Mbps |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Storage Interface | SATA |
| Audio Input | 1 channel |
| Audio Output | 1 channel |
| Decoding Format | H.265/H.264 |
| Operating Temperature | -10°C to +55°C |
| Operating Humidity | 10% to 90% |
| Audio Compression | G.711/G.726/PCM |
| Power Supply | 100-240V AC, 50/60Hz |
| Dimensions | 440mm |
| Video Output | HDMI, VGA |
| Resolution | 3840 × 2160 |
| Hard Drive Support | Yes |
| RAID | RAID 0, 1, 5, 10 |
| Network Interface | 2x 10/100/1000Mbps |
| USB Interface | 2 × USB 2.0, 1 × USB 3.0 |
| Alarm In/Out | 16/4 |
| Recording Resolution | 8MP (3840x2160) |
Highlights critical precautions to prevent serious injury, damage, or loss if neglected.
Outlines general connectivity and video format capabilities of the NVR.
Describes features for on-site display, including video output and screen layout options.
Details support for multiple HDDs, RAID configurations, and storage management.
Covers scheduling, recording types, and playback functionalities.
Provides essential steps for safely powering the NVR on, off, and rebooting it.
Guides users through the initial activation process by setting an administrator password.
Outlines the steps for activating and adding network cameras to the NVR system.
Covers various functions available in live view, including screen modes and recording.
Guides users on setting up parameters for PTZ camera control.
Explains how to set video encoding, resolution, and bitrate for recording.
Details how to set up recording schedules based on time and event triggers.
Outlines how to set up motion detection areas, sensitivity, and recording triggers.
Details various methods for searching and playing back recorded video files.
Explains different methods for exporting and backing up recorded video files.
Configures motion detection parameters, including area, sensitivity, and response actions.
Sets up basic network parameters like IP address, working mode, and DNS.
Guides on the essential process of initializing new hard disk drives before use.
To Next Page
