Network Video Recorder User Manual
199
14.3 Configuring Video Parameters
Purpose:
You can customize the image parameters including the brightness, contrast, saturation, image rotate and mirror for
the live view and recording effect.
Steps:
1. Enter the Image Settings interface.
Menu > Camera >Image
Figure 14. 4 Image Settings Interface
2. Select the camera to set image parameters.
3. Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast or saturation.
4. Configure the other image parameters according to your needs, like Wide Dynamic, Day/Night Switch,
Digital Noise Reduction, and Exposure Time.
The parameters must be supported by the connected IP camera.
The image parameters adjustment can affect both the live view and the recording quality.
5. Click the Apply button to save the settings.
To Next Page
Loading...
