Need help?Do you have a question about the HIKVISION DS-9664NI-I8 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Rack capacity | 2U |
| Rack mounting | Yes |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 30 W |
| Display modes | Live view |
| Input bandwidth | 320 Mbit/s |
| Output bandwidth | 256 Mbit/s |
| Maximum frame rate | 60 fps |
| Maximum resolution | 3840 x 2160 pixels |
| Alarm input channels | 16 |
| Video input channels | 64 channels |
| Alarm output channels | 4 |
| Supported resolutions | 3840 x 2160, 3840 x 2160, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768 |
| Video recording modes | 1080p, 2160p |
| Video formats supported | H.264, H.265, MPEG4 |
| Still image resolution(s) | 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720, 1024 x 768 |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 1 |
| RAID levels | 0, 1, 5, 6, 10 |
| HDD capacity | 0 GB |
| HDD interface | Serial ATA |
| Maximum storage capacity | 48 TB |
| Number of HDDs installed | 0 |
| Number of HDDs supported | 8 |
| Wi-Fi | No |
Weight and Dimensions| Depth | 445 mm |
|---|---|
| Width | 470 mm |
| Height | 90 mm |
| Weight | 10000 g |
Crucial safety guidelines for installing and operating the NVR.
Configuration of recording schedules, types, and event triggers.
Details on playback modes, search functions, and multi-channel playback.
Procedures for exporting and backing up record files to various storage devices.
Setting up alarms for events like video loss, tampering, and VCA.
Details on network interfaces, PoE, IPv6, and supported protocols.
Remote access, parameter setup, system control, and communication features.
Covers initial power-up, device activation, password setting, and login procedures.
Guides users through the initial NVR setup wizard for essential configurations.
Steps for setting up and configuring PTZ camera parameters for optimal control.
Instructions on how to customize and manage PTZ presets, patrols, and patterns.
How to define parameters affecting image quality, stream type, and resolution.
Setting up schedules for automatic recording and capture based on time.
Setting up motion detection parameters to trigger recording or capture events.
Setting up recording based on external alarm inputs.
Methods to protect recording files from overwriting or deletion.
Detailed methods for searching and playing back recorded video files.
Procedures for exporting and backing up record files to various storage devices.
Setting up a hot spare device for system reliability and data redundancy.
Configuring motion detection parameters and alarm response actions.
Handling actions for external sensor alarms and configuring linkage.
Setting up detection and response actions for video loss events.
Configuring video tampering detection and alarm response actions.
Configuring face detection rules, sensitivity, and alarm actions.
Setting up vehicle detection rules, including license plate capture.
Configuring rules for detecting objects crossing a virtual line.
Setting up intrusion detection rules for virtual regions.
Searching for captured face pictures and related video files based on criteria.
Setting up basic network parameters like IP address, gateway, and DNS.
Setting up disk arrays (RAID) for data redundancy and performance.
Steps to initialize newly installed hard disk drives before use.
Procedures for upgrading the NVR firmware using backup devices or FTP.
Common issues and their solutions for NVR operation.
To Next Page
