Network Video Recorder User Manual
5
Figure 1-4 Device Management Interface
3. Check the recorder status from the device list, and select an inactive recorder.
4. Click Activate to pop up the Activation interface.
5. Create a password and input the password in the password field, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
To Next Page
Loading...
