HIKVISION DS-9600NI-M8 Series User Manual

Network Video Recorder User Manual
12
the PoE interface supports the Plug-and-Play function.
Add PoE Camera
Steps
1. Go to Camera → Camera → PoE Settings.
2. Enable or disable long network cable mode by selecting Long Distance or Short Distance.
Long Distance
Long-distance (100 to 300 meters) network transmissions via PoE interface.
Short Distance
Short-distance (< 100 meters) network transmission via PoE interface.
Note
● The PoE ports are enabled with the short distance mode by default.
● The bandwidth of IP camera connected to the PoE via long network cable (100 to 300 meters)
cannot exceed 6 MP.
● The allowed max. long network cable may be less than 300 meters depending on different IP
camera models and cable materials.
● When the transmission distance reaches 100 to 250 meters, you must use the CAT5E or CAT6
network cable to connect with the PoE interface.
● When the transmission distance reaches 250 to 300 meters, you must use the CAT6 network
cable to connect with the PoE interface.

HIKVISION DS-9600NI-M8 Series Specifications

General

Brand	HIKVISION
Model	DS-9600NI-M8 Series
Category	Network Hardware
Language	English