Network Video Recorder User Manual
6
Figure 1-5 Activation
6. Click OK to start activation.
7. Click Modify Netinfo to pop up the Network Parameter Modification interface, as shown below.
Figure 1-6 Modify Network Parameters
8. Change the recorder IP address to the same subnet with your computer.
Modify the IP address manually.Check Enable DHCP.
9. Input the password to activate your IP address modification.
1.1.5 Activate via Web Browser
You can get access to the recorder via web browser. You may use one of the following web
browsers: Internet Explorer 6.0 and above, Apple Safari, Mozilla Firefox, and Google Chrome. The
To Next Page
Loading...
