EasyManuals Logo

HIKVISION DS-K1T341CMF User Manual

HIKVISION DS-K1T341CMF
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #127 background imageLoading...
Page #127 background image
Enable to report alarm when the card reading aempts reach the set value.
Enable Tampering Detecon
Enable the an-tamper detecon for the card reader.
Enable Card No. Reversing
The read card No. will be in reverse sequence
aer enabling the funcon.
Open Door via Bluetooth
The door can open via bluetooth aer enabling the funcon.
If select Sub Card Reader:
Card Reader Type/Card Reader
Descripon
Get card reader type and descripon. They are read-only.
Enable Card Reader
Enable the card reader's funcon.
Authencaon
Select an authencaon mode according to your actual needs from the drop-down list.
Mulple People Authencaon
Mulple people can be authencated at the same me.
Recognion Interval
If the interval between card presenng of the same card is less than the congured value, the
card
presenng is invalid.
Alarm of Max. Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Max. Authencaon Failed Aempts
Enable to report alarm when the card reading aempts reach the set value.
Communicaon with Controller Every
When the access control device cannot connect with the card reader for longer than the set
me, the card reader will turn oine automacally.
Max. Interval When Entering Password
When you entering the password on the card reader, if the interval between pressing two digits
is longer than the set value, the digits you pressed before will be cleared automacally.
OK LED Polarity/Error LED Polarity
Set OK LED Polarity/Error LED Polarity of the access control device according to the card reader
parameters. Generally, adopts the default
sengs.
Enable Tampering Detecon
Enable the an-tamper detecon for the card reader.
Open Door via Bluetooth
DS-K1T341C Series Face Recognion Terminal User Manual
111

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T341CMF and is the answer not in the manual?

HIKVISION DS-K1T341CMF Specifications

General IconGeneral
TypeFace recognition terminal
Product colorBlack, Silver
Cards capacity3000 cards
Event capacity150000
Access code reader-
Authentication typeAccess chip/card, Face recognition
Face recognition distance0 - 2 m
Face recognition duration0.2 s
Access chip/card reader typeContact
International Protection (IP) codeIP65
Operating system installedLinux
Screen shapeFlat
Display diagonal4.3 \
Maximum resolution272 x 480 pixels
Touchscreen technologyCapacitive
Total megapixels2 MP
Ethernet LAN data rates10, 100 Mbit/s
Power consumption (typical)10 W
Operating temperature (T-T)-30 - 60 °C

Related product manuals