HIKVISION DS-K1T341CMF User Manual

Figure 9-8 Set Output Transformaon Rule
2) Select rules on the le list.
The selected rules will be added to the right list.
3)
Oponal: Drag the rules to change the rule order.
4) Click OK.
5) In the Custom Wiegand tab, set the rule's start bit, length, and the decimal digit.
7.
Click Save.
9.7.5
Congure Person Authencaon Mode
You can set the passing rules for person to the specied the access control device according to your
actual needs.
Before You Start
●
Add access control device to the client, and make sure the access control device support the
funcon of person authencaon.
●
Add person and assign access authorizaon to designed person. For details, refer to Person
Management and Set Access Group to Assign Access Authorizaon to Persons .
DS-K1T341C Series Face Recognion Terminal User Manual
167

HIKVISION DS-K1T341CMF Specifications

General

Type	Face recognition terminal
Product color	Black, Silver
Cards capacity	3000 cards
Event capacity	150000
Access code reader	-
Authentication type	Access chip/card, Face recognition
Face recognition distance	0 - 2 m
Face recognition duration	0.2 s
Access chip/card reader type	Contact
International Protection (IP) code	IP65
Operating system installed	Linux
Screen shape	Flat
Display diagonal	4.3 \
Maximum resolution	272 x 480 pixels
Touchscreen technology	Capacitive
Total megapixels	2 MP
Ethernet LAN data rates	10, 100 Mbit/s
Power consumption (typical)	10 W
Operating temperature (T-T)	-30 - 60 °C