HIKVISION DS-K1T341CMF User Manual

No. Descripon
7 IR Light
8 Camera
9 Camera
10 White Light
11 IR Light
12 Display Screen
13 Fingerprint Module
Note
Supported by parts of the device modules.
14 Card Presenng Area
15 Mic
: This scker means "Hot parts! Burned ngers when handling the parts. Wait one-half hour
aer switching o before handling parts." It is to indicate that the marked item can be hot and
should not be touched without taking care. For device with this scker, this device is intended for
installaon in a restricted access locaon, access can only be gained by service persons or by users
who have been instructed about the reasons for the
restricons applied to the locaon and about
any precauons that shall be taken.
DS-K1T341C Series Face Recognion Terminal User Manual
3

HIKVISION DS-K1T341CMF Specifications

General

Type	Face recognition terminal
Product color	Black, Silver
Cards capacity	3000 cards
Event capacity	150000
Access code reader	-
Authentication type	Access chip/card, Face recognition
Face recognition distance	0 - 2 m
Face recognition duration	0.2 s
Access chip/card reader type	Contact
International Protection (IP) code	IP65
Operating system installed	Linux
Screen shape	Flat
Display diagonal	4.3 \
Maximum resolution	272 x 480 pixels
Touchscreen technology	Capacitive
Total megapixels	2 MP
Ethernet LAN data rates	10, 100 Mbit/s
Power consumption (typical)	10 W
Operating temperature (T-T)	-30 - 60 °C