Note
Only the access control device and other devices or systems (such as door staon, indoor staon,
main staon, plaorm) are in the same IP segment, the two-way audio can be performed.
Go to Conguraon → Video Intercom → Linked Network Sengs .
Set the main
staon's IP address and SIP server's IP address.
Click Save.
Press Buon to Call
Steps
1.
Click Intercom → Press Buon to Call to enter the sengs page.
2.
Set the parameters.
-
Edit call No. for every buon.
-
Check Call Management Center to set the buon calling center.
Note
If you check Call Management Center and set the call No. as well, call management center has
higher privilege than call No.
8.5.21 Access Control Sengs
Set Door Parameters
Click Conguraon → Access Control → Door Parameters .
DS-K1T673 Series Face Recognion Terminal User Manual
104