Need help?Do you have a question about the HIKVISION DS-K1T673M and is the answer not in the manual?
General| Model | DS-K1T673M |
|---|---|
| Category | Touch terminals |
| Operation System | Linux |
| Screen Size | 7 inch |
| Screen Resolution | 1024 × 600 |
| Touch Type | Capacitive |
| RAM | 1 GB |
| ROM | 8 GB |
| Camera | 2 MP |
| RS-485 | 1 |
| Lock output | 1 |
| Exit button | 1 |
| Door contact input | 1 |
| I/O input | 1 |
| I/O output | 1 |
| TAMPER | 1 |
| Face capacity | 3000 |
| Card capacity | 100, 000 |
| Face recognition distance | 0.3 m to 1.5 m |
| Live view | Yes |
| Two-way audio | Yes |
| Auto-uploading snapshot | Yes |
| Video intercom | Yes |
| Working temperature | -30°C to 60°C |
| Installation | Wall mounting |
| Protection level | IP65 |
| Audio compression rate | G.711 |
| Audio input | Built-in microphone |
| Audio output | Built-in speaker |
| Communication | TCP/IP |
| Wired network | 10/100 Mbps |
| Network interface | 1 RJ45 |
| Wiegand | 26/34 bits |
| Event capacity | 100000 |
| Card type | IC card |
| Card reading distance | 5 cm |
| Face recognition duration | ≤ 0.2 s |
| Supplement light | IR light |
| Power supply | 12 VDC/2 A |
| Working humidity | 10% - 90% |
| Language | Multiple languages |
| Application environment | Indoor |
| FOV | 90° |
Highlights critical warnings where neglecting them may cause serious injury or death.
Provides precautions where neglecting them may cause injury or equipment damage.
Step-by-step instructions for flush mounting the device using a gang box.
Provides instructions for surface mounting the device on walls or other surfaces.
Details the process of mounting the device using a bracket, including preparation steps.
Steps to activate the device directly through its interface after powering on.
Instructions for activating the device using a web browser and its default IP address.
Guide on using the SADP tool to detect, activate, and modify device IP addresses.
Procedure for activating devices through the iVMS-4200 client software.
Guides on setting up wired or Wi-Fi network parameters for the device.
Configuration options for network, Wi-Fi, RS-485, Wiegand, ISUP, and Hik-Connect.
Interface for adding, editing, deleting, and searching users.
Customizes face recognition performance parameters like liveness and distance.
Allows setting access control permissions and parameters for the device.
Configuration of attendance modes: disabled, manual, auto, and manual/auto.
To Next Page