HIKVISION DS-K1T673M - OSD Settings; Alarm Settings; Access Control Settings

9.5.10 OSD Sengs
You can customize the camera name, me/date format, display mode, and OSD size displayed on
the live view.
Steps
1.
Click
Conguraon → Image → OSD Conguraon to enter the sengs page.
2.
Check the corresponding checkbox to select the display of camera name, date or week if
required.
3.
Edit the Camera Name.
4.
Select from the drop-down list to set the Time Format and Date Format.
5.
Congure the text overlay sengs.
1) Check the checkbox in front of the textbox to enable the on-screen display.
2) Enter the characters in the textbox.
Note
Up to 4 text overlays are congured.
6.
Adjust the OSD posion and alignment.
7.
Click Save to enable the sengs.
9.5.11 Alarm
Sengs
Set the alarm output parameters.
Steps
1.
Click Conguraon → Event → Alarm Sengs → Alarm Output .
2.
Set Alarm Name and Output Delay.
9.5.12 Access Control
Sengs
Set Authencaon Parameters
Click Conguraon → Access Control → Authencaon Sengs .
Note
The funcons vary according to dierent models. Refers to the actual device for details.
DS-K1T673 Series Face Recognion Terminal User Manual
103