HIKVISION DS-K1T673M - Person Management

Full screen view.
/ / /
The door status is open/closed/remaining open/remaining closed.
Controlled Status
You can select open/closed/remaining open/remaining closed status according to your actual
needs.
Real-Time Event
You can view the event Employee ID, Name, Card No., Event Type, Time, and
Operaon. You can
also click View More to enter the search
condions, including the event type, employee ID, the
name, the card No., door, the start me, and the end me, and click Search. The results will be
displayed on the right panel.
Person Informaon
You can view the added and not added informaon of person face, card, ngerprint and keyfob.
Network Status
You can view the connected and registered status of wired network, wireless network, OTAP,
ISUP and cloud service.
Basic
Informaon
You can view the model, serial No. and rmware version.
Device Capacity
You can view the person, face, card, ngerprint, event and keyfob capacity.
9.3 Person Management
Click Add to add the person's informaon, including the basic informaon, cercate,
authencaon and sengs.
Add Basic
Informaon
Click Person Management → Add to enter the Add Person page.
Add the person's basic
informaon, including the employee ID, the person's name, gender, and
person type.
If you select Visitor as the person type, you can set the visit
mes.
Click Save to save the sengs.
Set Permission Time
Click Person Management → Add to enter the Add Person page.
Enable Long-Term
Eecve User, or set Long-Term Eecve User, and the person can only has the
permission within the congured me period according to your actual needs.
Set the door permission.
Click Save to save the
sengs.
DS-K1T673 Series Face Recognion Terminal User Manual
92