Note
●
You can also change the sengs in System Sengs.
●
If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
●
If you do not
congure the applicaon mode and tap Next, the system will select Indoor by
default.
●
If you
acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
6.3 Privacy Sengs
Aer acvaon, selecng applicaon mode, and selecng network, you should set the privacy
parameters, including the picture uploading and storage.
Select parameters according to your actual needs.
Figure 6-3 Privacy
DS-K1T673 Series Face Recognion Terminal User Manual
37