HIKVISION DS-K2600 Series User Manual

DS-K2600 Serial Access Controller
32
either modifying the IP address manually or checking the checkbox of
Enable DHCP.
6. Input the password and click the Save button to activate your IP address
modification.
6.2 Activation via Client Software
The client software is versatile video management software for multiple kinds
of devices.
Get the client software from the supplied disk or the official website, and
install the software according to the prompts. Follow the steps to activate the
control panel.
Steps:
1. Run the client software and the control panel of the software pops up, as
shown in the figure below.

HIKVISION DS-K2600 Series Specifications

General

Brand	HIKVISION
Model	DS-K2600 Series
Category	IP Access Controllers
Language	English