HIKVISION DS-K2800 Series Manual

Title:
DS-K1800 Series Card Readers Connect
to DS-K2800 Series Access Controllers
Version:
v1.0
Date:
7/15/2017
Product:
Access Control Device
Page:
1 of 5
DS-K1800 Series Card Readers Connect to DS-K2800
Series Access Controllers
Preparation
Connecting card reader to access controller is mainly applied to swiping card to open the door for entrring
or exiting. The models of card reader and access controller in this guide are as below:
Card Reader
Access Controller
DS-K1801M/MK, DS-K1802M/MK,
DS-K1801E/EK, DS-K1802E/EK
DS-K2801,
DS-K2802,
DS-K2804
Notice
1. Please cut off power supply before wiring;
2. DS-K1800 Series Card Readers support standard Wiegand 26/34 protocol , the details about
Wiegand interface about of card reader are as below;
3. Correspondingly, there are wiegand interfaces in DS-K2800 series access controllers;
Color
Description
Red
PWR(+12 VDC)
Black
GND
Green
Wiegand W0
White
Wiegand W1
Blue
Wiegand 26/34
Purple
Beep Control
Brown
OK
Orange
ERR
Cable
Wiring mode
Wiegand Mode
Blue Wiegand
cable
Grounded
Wiegand 26
Not Grounded
Wiegand 34
DS-K2601
DS-K2602
DS-K2604

HIKVISION DS-K2800 Series Specifications

General

Brand	HIKVISION
Model	DS-K2800 Series
Category	IP Access Controllers
Language	English