EasyManua.ls Logo

HIKVISION DS-K3G201 - 3.1 Wiring Electric Supply; 3.2 Access control connection

HIKVISION DS-K3G201
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DS-K3G201 Series Tripod Turnstile User Manual
9
Chapter 3 General Wiring
Wiring Electric Supply
The turnstile supports wiring the AC electric supply for the whole system's power supply.
The voltage fluctuation of the electric supply is between 100 VAC and 220 VAC, 50 to 60 Hz.
Usage about steps and lists are illustrated as follows.
Terminal PE should connect to a ground wire to avoid hazard when people touching the device.
Access control connection
The access control panel of the turnstile can realize the two-way function of in and out. The
external access control board needs to have the relay output function. The connect interfaces of
external access board is shown in the figure below;