HIKVISION DS-K3G201 - 4.1.2 Function key function description

DS-K3G201 Series Tripod Turnstile User Manual
12
Main Board Description
Function Key description
No.
Interface
Description
1
Power in
DC 24V power supply
2
ZERO/VCC/GND
Arm position detection, when triggered the Magnet
magnetic recovered, arm locked.
3
OP_L/COM
Entrance direction open
4
OP_R/COM
Exit direction open
5
VCC/GND
DC 12V power out
6
VCC/G/R/GND
direction indicator control
7
24V_M/GND
Drop arm electromagnets connection
8
M1/V_M
Exit direction electromagnets connection
9
M0/V_M
Entrance direction electromagnets connection
10
MENU KEYS
【MENU】,【INC】,【DEC】 for debuging
Key name
Description
MENU
1. Press this key in the standby interface to enter the
system menu
2. In the system menu interface, select the
corresponding menu and press this key to enter the
menu parameter setting interface
3. After the menu is set, press this key to save the
parameters and return to the system menu interface
INC
Scroll up to select the system menu and add 1 function
when setting parameters
DEC
Scroll down to select the system menu and the function
of subtracting 1 when setting parameters
Remark
In the system menu and menu setting interface, if there
is no key operation within 5 seconds, the system will
automatically exit the menu to the standby interface.