HIKVISION DS-KH6320-LE1

Before You Start
•
Tap Sengs → → Preference → Alarm to enable the Alarm funcon.
•
You should create an arm/disarm password. Please refers to Password Sengs
for the details.
Steps
1.
Tap
to enter the scene page.
2.
Select Stay Mode, Away Mode, Sleeping Mode or Custom.
3.
Enter the arm/disarm password to enable the scene.
4.
Tap OK.
3.3.2 Disarm Your Room
Steps
1.
Tap to disarm.
2.
Enter the arm/disarm password.
3.
Tap OK.
3.4 Arming Mode
Sengs
4 arming modes can be congured: stay mode, away mode, sleeping mode and
custom mode.
Before You Start
Tap Sengs → → Preference to enable Alarm funcon.
Steps
Note
Arming status page and zone sengs page are hidden by default. You should enable
alarm funcon rst.
1.
Tap Sengs → → Alarm Sengs to enter the arming mode sengs page.
2.
Tap Stay Mode, Away Mode, Sleeping Mode, or Custom to enter the page.
Network Indoor
Staon Operaon Guide
9