HIKVISION DS-KH6320-TE1 Configuration Guide

Figure 3-21 Set Indoor Staon No.
2.
Select Indoor Staon to set the room informaon, live view duraon, SIP parameters and
password.
Room
Informaon
You can set room name, oor No., and room No. Tap Advanced Sengs to set community
No., building No. and unit No. if you need.
Note
●
Community No., building No., and unit No. can be omied if there is no such informaon.
●
If there are two indoor staons that are in the same building, and should call each other,
enter the the room No. directly to call.
●
If there are two indoor
staons that are in two buildings, and should call each other, enter
the building No. and the room No. to call. For examle, call 1-405 to call room 405 in
building 1.
Live View Duraon
You can set the duraon of live view.
SIP Sengs
You can set SIP parameters. For more details, please refer to: SIP Sengs
Password Sengs
You can set unlock password and duress code.
3.
Select Indoor Extension to set the room
informaon, live view duraon, registraon password
and enable SIP 1.0 according to your needs.
Network Indoor Staon Conguraon Guide
20

HIKVISION DS-KH6320-TE1 Specifications

General

Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Product color	Black, Grey
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, SIP, RTSP
Video codecs	G.711u
Connectivity technology	Wired
Maximum number of cameras supported	-
Operating system installed	Linux
Power consumption (typical)	6 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176920

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm