HIKVISION DS-KH6320-TE1 Configuration Guide

Room Informaon
You can set room name and No. Tap Advanced to set the community No., building No., and
unit No. if you need.
When calling the indoor staon and the two devices are in the same building, you can call the
room No. directly.
If
Live View
Duraon
You can set the duraon of live view.
Registraon Password
You can create a new SIP registraon password.
Enable SIP 1.0
You can enable SIP 1.0 protocol according to your needs.
3.3.5 SIP
Sengs
Devices can communicate with each other via SIP protocol. You create set the SIP register
password, enable standard SIP and set VOIP account.
Steps
1.
Tap
Sengs → → Conguraon , and enter admin (acvaon) password.
2.
Tap SIP Sengs in Local Informaon Page.
Figure 3-22 SIP Sengs
Network Indoor Staon Conguraon Guide
21

HIKVISION DS-KH6320-TE1 Specifications

General

Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Product color	Black, Grey
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, SIP, RTSP
Video codecs	G.711u
Connectivity technology	Wired
Maximum number of cameras supported	-
Operating system installed	Linux
Power consumption (typical)	6 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176920

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm