HIKVISION DS-KH6320-TE1 Configuration Guide

Figure 3-39 Restore Page (For DS-KH6320EY-WTE2)
Restore All
Restore all parameters of the indoor staon to factory sengs and the system will reboot
automacally.
Restore Video Intercom System
All devices in the video intercom system (the indoor staon and its linked devices) will be
restored to the factory sengs. And the system will reboot automacally.
Restore Linked Indoor Extension
Restore all parameters of the linked indoor extension to factory sengs and the system will
reboot
automacally.
Restore Linked Door Staon
Restore all parameters of the linked door staon to factory sengs and the system will
reboot automacally.
Restore (For Normal Indoor Staon)
Restore Default Sengs
Tap Restore Default Sengs to restore parameters except network parameters and
acvaon password to factory sengs. And the system will reboot automacally.
Restore All
Tap Restore All to restore all parameters to factory sengs and the system will reboot
automacally.
Network Indoor Staon Conguraon Guide
38

HIKVISION DS-KH6320-TE1 Specifications

General

Display diagonal	7 \
Touchscreen type	Capacitive
Display resolution	1024 x 600 pixels
Display technology	LCD/TFT
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Product color	Black, Grey
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	1
Supported network protocols	TCP/IP, SIP, RTSP
Video codecs	G.711u
Connectivity technology	Wired
Maximum number of cameras supported	-
Operating system installed	Linux
Power consumption (typical)	6 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	85176920

Weight and Dimensions

Depth	15.1 mm
Width	200 mm
Height	140 mm