EasyManuals Logo
Home>HIKVISION>Intercom System>DS-KH6320-WTE2

HIKVISION DS-KH6320-WTE2 Installation Guide

HIKVISION DS-KH6320-WTE2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
3 Installaon
Before You Start
Make sure the device in the package is in good condion.
Make sure all the related equipment is power-o during the installaon.
Check the product specicaon for the installaon environment.
Steps
1.
Fix the DIN rail onto the wall.
Note
You are required to ulize a matched DIN rail.
2.
Press the red clip upward, and lock it to the DIN rail.
Figure 3-1 Install the Video/Audio Distributor
Video Audio Distributor Installaon Guide
3

Other manuals for HIKVISION DS-KH6320-WTE2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-KH6320-WTE2 and is the answer not in the manual?

HIKVISION DS-KH6320-WTE2 Specifications

General IconGeneral
ColorYes
Speakerphone-
Connectivity technologyWireless
Voice codecsG.711u
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size32 GB
Display diagonal7 \
Touchscreen typeCapacitive
Display resolution1024 x 600 pixels
Display technologyLCD/TFT
Product colorBlack, Grey
Operating system installedLinux
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Supported network protocolsTCP/IP, SIP, RTSP
Outdoor unit includedNo
Operating temperature (T-T)-10 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Power consumption (typical)6 W
Weight and Dimensions IconWeight and Dimensions
Depth15.1 mm
Width200 mm
Height140 mm

Related product manuals