Rail Network Video Recorder Quick Start Guide
14
1. Insert the key into the Lock slot in HDD lock.
2. To start up device, rotate it from to . You will see the startup picture indicating device is starting.
Figure 3. 13 Startup Picture
3.4 Activating Your Device
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No operation is allowed
before activation.
Steps:
1. Create the password by inputting the same password in the text field of New Password and Confirm.
Figure 1. 1 Settings Admin Password
2. Click OK to save the password and activate the device.
To Next Page
Loading...
