Need help?Do you have a question about the HIKVISION DS-7108NI-K1/W/M and is the answer not in the manual?
General| Model | DS-7108NI-K1/W/M |
|---|---|
| Channel Input | 8 |
| Max Incoming Bandwidth | 80 Mbps |
| Max HDD Capacity | 6TB |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Wi-Fi | No |
| Power Supply | 12VDC |
| Operating Humidity | 10% to 90% |
| Type | NVR |
| Max Recording Resolution | 8MP |
| HDD Bays | 1 |
| Video Output | 1 HDMI, 1 VGA |
| HDMI Output Resolution | 4K |
| VGA Output Resolution | 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz |
| Decoding Capability | 8 × 1080p@30fps |
| Network Protocol | TCP/IP, DHCP, DNS |
| Network Interface | 1 x RJ45 10/100/1000 Mbps |
| Consumption (without HDD) | ≤10W |
| Operating Temperature | -10°C to +55°C |
| Weight (without HDD) | 1.4 kg (3.09 lb) |
Disclaimer regarding product warranty, liability, and usage compliance with laws.
Procedures for starting up, shutting down, and rebooting the device.
Detailed steps for powering on, shutting down, and restarting the device.
Steps to activate the device by setting an admin password.
Instructions for logging in and logging out of the device interface.
Setting image quality parameters like stream type, resolution, and encoding.
Setting up automatic start/stop times for recording based on a schedule.
Setting up motion detection to trigger recording or other actions.
Playing back recorded video files.
Backing up record files to various storage devices.
Backing up files using normal video search criteria.
Backing up event-related record files by event type.
Setting up motion detection to trigger alarms and response actions.
Detecting video tampering (lens cover) and setting alarm response actions.
Detecting objects entering a virtual region and triggering alarms.
Detecting objects crossing a virtual line and triggering alarms.
Configuring handling actions for various system exceptions like HDD full or network errors.
To Next Page
