Need help?Do you have a question about the HIKVISION DS-7104NI-SN/P and is the answer not in the manual?
General| Model | DS-7104NI-SN/P |
|---|---|
| Channel Input | 4 |
| IP Video Input | 4 |
| Storage Capacity | Up to 6TB |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Synchronous playback | 4-ch |
| SATA | 1 |
| USB Interface | 2 × USB 2.0 |
| Power Supply | 12V DC |
| Power Consumption (without HDD) | ≤ 10W |
| Operating Humidity | 10% to 90% |
| Type | Network Video Recorder |
| HDD Interface | 1 SATA |
| Video Output | HDMI, VGA |
| Network Interface | 1 (RJ45 10M/100M/1000Mbps) |
| PoE Interface | No |
| Supported Standard | ONVIF |
| Operating Temperature | -10°C to +55°C |
| Audio Output | 1-ch, RCA |
| HDMI Output | 1 (1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz) |
| VGA Output | 1 (1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz) |
Details on FCC compliance, conditions, and statements for device operation.
Information regarding CE marking and compliance with European standards.
Compliance statement for Industry Canada's radio interference regulations.
Guidance on precautions to prevent serious injury, death, or equipment damage.
Tips for proper installation and operation to avoid damage and ensure safety.
Overview of general capabilities including connectivity and channel support.
Details on video output, screen display, and detection functions.
Features related to hard disk drive management and capacity.
Functions for recording schedules, types, and video playback.
Description and function of buttons and indicators on the NVR's front panel.
Instructions for operating the NVR using the infrared remote control.
Guide on using a USB mouse for NVR navigation and control.
Explanation of the on-screen keyboard and input methods.
Description of interfaces and ports located on the NVR's rear panel.
Procedures for properly powering on and off the Network Video Recorder.
Steps to set a strong administrator password for initial device activation.
Guide through the initial setup wizard for basic NVR configuration.
Instructions for logging into and out of the NVR system.
Steps to activate and add network cameras to the NVR.
Overview of the live view function and its icons.
Details on single screen, multi-screen, auto-switch, and other live view controls.
Customizing display settings like output interface, dwell time, and camera order.
Setting up parameters for Pan, Tilt, and Zoom camera control.
Configuring camera positions, movement paths, and patterns for PTZ cameras.
Interface and icons for controlling PTZ camera functions.
Setting image quality, stream type, resolution, and recording parameters.
Setting up the automatic start and stop times for video recording.
Setting up motion detection parameters and alarm response actions.
Configuring recording triggered by external alarm inputs.
Setting up recording triggered by Video Content Analysis (VCA) alarms.
Instructions for manually starting and stopping recording.
Setting up special recording schedules for holidays.
Enabling redundant recording for enhanced data safety and reliability.
Grouping HDDs to save recorded files within specific HDD groups.
Methods to lock recorded files or set HDD property to Read-only.
Steps for playing back recorded video by channel or time.
Detailed steps for playing back video recorded at a specific time.
Searching and playing back records based on event types like alarms.
Using video tags to search for record files and specific time points.
Utilizing smart playback to efficiently review video with motion or VCA events.
Playing back record files associated with system log entries.
Steps to play back video files from external devices.
Additional playback features like frame-by-frame and digital zoom.
Methods for exporting and backing up recorded video files.
Operations for managing USB flash drives and HDDs used for backup.
Configuring motion detection parameters and alarm response actions.
Setting handling actions for external sensor alarms.
Configuring actions for detecting video signal loss.
Setting up alarms for video tampering events.
Configuring alarms for Video Content Analysis (VCA) events.
Configuring responses for various system exceptions like HDD errors.
Defining actions like audible warnings, notifications, and email alerts.
Manual control for triggering or clearing alarm outputs.
Setting up basic network parameters like IP address and DNS.
Advanced network configurations including EZVIZ Cloud P2P and DDNS.
Monitoring real-time network traffic information and status.
Testing network delay, packet loss, and exporting network packets.
Steps to initialize a newly installed hard disk drive.
Adding and configuring NAS or IP SAN disks as network HDDs.
Organizing multiple HDDs into groups for managed recording.
Allocating specific storage quotas for recorded files per camera.
Monitoring the operational status of installed hard disk drives.
Performing S.M.A.R.T. and bad sector detection for HDDs.
Setting up alarms for HDD errors like uninitialized or abnormal status.
Customizing on-screen display settings like date, time, and camera name.
Setting up privacy mask zones to obscure sensitive surveillance areas.
Adjusting video image parameters such as brightness, contrast, and saturation.
Accessing device, camera, record, alarm, network, and HDD system information.
Searching, viewing, and exporting system operation and event log files.
Managing IP camera configuration data via Excel files for backup.
Exporting NVR configuration for backup and importing to other devices.
Procedures for upgrading the NVR firmware using backup devices or FTP.
Options to restore NVR settings to factory defaults.
Setting parameters for the RS-232 serial port for configuration or data transmission.
Setting display language, resolution, time zone, and mouse pointer speed.
Configuring Daylight Saving Time adjustments.
Adjusting device name, number, auto-logout timer, and menu output mode.
Adding, deleting, and editing user accounts and their permissions.
Definitions of technical terms and acronyms used in the manual.
Solutions for common problems like no image, audible warnings, and camera connectivity.
Summary of added, updated, and optimized features in version 3.0.13.
Summary of updated and added features in version 3.0.6.
Summary of added and deleted features in version 3.0.4.
Compatibility list of Hikvision IP camera models with the NVR.
Compatibility list of third-party IP camera models with the NVR.
To Next Page
