Do you have a question about the HIKVISION DS-7616NI-K2 and is the answer not in the manual?
Input bandwidth | 160 Mbit/s |
---|---|
Maximum frame rate | 30 fps |
Maximum resolution | 3840 x 2160 pixels |
Alarm input channels | 4 |
Video input channels | 16 channels |
Alarm output channels | 1 |
Supported resolutions | 3840 × 2160, 2560 × 1440, 1920 × 1080, 1600 × 1200, 1280 × 1024, 1280 × 720, 1024 × 768 |
Video formats supported | H.264, H.264+, H.265, H.265+, MPEG4 |
HDMI output | Yes |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Supported network protocols | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
Output voltage | 12 V |
Power consumption (max) | 40 W |
Power consumption (typical) | 15 W |
Operating temperature (T-T) | -10 - 55 °C |
Operating relative humidity (H-H) | 10 - 90 % |
HDD capacity | 0 GB |
HDD interface | Serial ATA |
Maximum storage capacity | 6 TB |
Number of HDDs installed | 0 |
Number of HDDs supported | 2 |
Product color | Black |
Rack capacity | 1U |
Wi-Fi | No |
Depth | 315 mm |
---|---|
Width | 385 mm |
Height | 52 mm |
Weight | 1000 g |
Sets image quality, stream types, and encoding for recording.
Configures motion detection parameters, areas, and sensitivity.
Defines how the system reacts to triggered alarms.
Prepares new hard drives for use with the NVR.
Provides solutions for common operational problems and errors.