Need help?Do you have a question about the HIKVISION DS-7616NXI-K2 and is the answer not in the manual?
General| Model | DS-7616NXI-K2 |
|---|---|
| Category | Network Hardware |
| Video Input | 16 channels |
| Incoming Bandwidth | 160 Mbps |
| Two-Way Audio | Yes |
| SATA | 2 SATA interfaces |
| HDD Bays | 2 |
| Capacity | Up to 10TB per HDD |
| Alarm In/Out | 16/4 |
| Alarm I/O | 16 inputs, 4 outputs |
| Consumption (without HDD) | ≤ 15 W |
| Working Humidity | 10% to 90% |
| Operating Humidity | 10% to 90% |
| Video Output | HDMI, VGA |
| HDMI Output Resolution | 4K (3840 × 2160)/30Hz |
| VGA Output Resolution | 1920 × 1080/60Hz |
| Decoding Format | H.265, H.264 |
| IP Video Input | 16 channels |
| Audio Output | 1 channel |
| Max HDD Capacity | 20 TB |
| Network Interface | RJ45 10/100/1000 Mbps |
| USB Interface | 2 × USB 2.0, 1 × USB 3.0 |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | ≤ 15 W |
| Working Temperature | -10°C to +55°C (14°F to 131°F) |
| Operating Temperature | -10°C to +55°C (14°F to 131°F) |
| Recording Resolution | Up to 12 MP |
Steps to activate the video recorder by setting an admin password.
Steps for playing back recorded videos from a selected date and camera.
Playing back videos that contain specific detection events.
Managing user accounts, permissions, and password settings.
Setting up remote access and device binding via the Hik-Connect platform.
Configuring motion detection settings for cameras.
Configuring Power over Ethernet (PoE) power and binding.
Advanced system configuration options.
Advanced general system settings.
Advanced network configuration options.
Advanced camera management settings.
Advanced network camera configuration and management.
Steps for logging into the device using a web browser.
To Next Page