Need help?Do you have a question about the HIKVISION DS-7616NI-Q2/16P and is the answer not in the manual?
General| DHCP client | Yes |
|---|---|
| Input bandwidth | 160 Mbit/s |
| Output bandwidth | 80 Mbit/s |
| Maximum resolution | 3840 x 2160 pixels |
| Video input channels | 16 channels |
| Alarm output channels | 1 |
| Supported resolutions | 3840 × 2160, 1920 × 1080, 1600 × 1200, 1280 × 1024, 1280 × 720, 1024 × 768 |
| Video recording modes | 720p, 1080p |
| Video formats supported | H.264, H.264+, H.265, H.265+, MPEG4 |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS |
| Product color | Black |
| Rack capacity | 1U |
| AC input voltage | 100 - 240 V |
| Power consumption (max) | 280 W |
| Total Power over Ethernet (PoE) budget | 150 W |
| Wi-Fi | No |
| HDD interface | Serial ATA |
| Maximum storage capacity | 16 TB |
| Number of HDDs supported | 2 |
| Total installed storage capacity | 1000 GB |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 315 mm |
|---|---|
| Width | 385 mm |
| Height | 52 mm |
| Weight | 3000 g |
Provides essential safety guidelines for operating the device.
Outlines general features and compatibility of the network video recorder.
Describes features related to local display and output capabilities.
Details the capabilities for managing Hard Disk Drives within the NVR.
Covers configuration of alarms for various events and system exceptions.
Details the network capabilities and protocols supported by the NVR.
Describes the components and indicators on the front panel of the NVR.
Guides through the initial setup and activation process for the NVR device.
Explains the correct procedures for powering the NVR on and off to ensure longevity.
Covers the essential first-time activation process, including setting an admin password.
Details the procedures for logging into and out of the NVR system.
Details the process of adding and connecting IP cameras to the NVR system.
Explains how to activate IP cameras to ensure they are in an active state before adding.
Guides on setting up the parameters for controlling PTZ (Pan, Tilt, Zoom) cameras.
Explains how to set and manage PTZ presets, patrols, and patterns.
Guides on setting parameters affecting image quality, stream type, and resolution for recording.
Covers various methods for playing back recorded video files.
Covers methods for backing up recorded video files to external devices.
Explains the process of quickly exporting record files to a backup device.
Guides on configuring motion detection parameters, including areas, sensitivity, and response actions.
Guides on configuring face detection to identify and take actions on detected faces.
Guides on configuring region exiting detection for objects leaving a virtual region.
Explains how to detect unattended baggage left in a predefined region.
Guides on detecting objects that have been removed from a predefined region.
Explains how to detect abnormal audio conditions like sudden sound changes or loss.
Guides on configuring detection for sudden changes in the surveillance scene.
Explains how to detect image blur caused by lens defocus.
Guides on configuring PIR alarm based on intruder detection via heat energy.
Guides on searching for captured face images and their related video files.
Guides on configuring basic network parameters like IP address, gateway, and DNS.
Guides on enabling and configuring Hik-Connect for remote access via mobile app or web.
Guides on configuring Point-to-Point Protocol over Ethernet (PPPoE) for network access.
Explains how to configure an NTP server for accurate system date and time synchronization.
Guides on configuring the HTTPS port for secure web communication and authentication.
Guides on testing network delay and packet loss to assess network connectivity.
Guides on initializing newly installed Hard Disk Drives (HDDs) before they can be used.
Explains HDD detection functions like S.M.A.R.T. and Bad Sector Detection.
Guides on configuring On-Screen Display (OSD) settings for cameras, including date/time and name.
Explains how to search and export NVR operation, alarm, and exception log files.
Offers solutions for common issues like no image display or audible warnings.
Addresses problems with live view, such as image freezing or poor network performance.
Addresses issues with live view when accessed remotely, focusing on network and performance.
To Next Page
