Need help?Do you have a question about the HIKVISION DS-7600NXI-I/S and is the answer not in the manual?
General| Model | DS-7600NXI-I/S |
|---|---|
| Category | Network Hardware |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Outgoing Bandwidth | 160 Mbps |
| Synchronous Playback | 16 Channels |
| Max HDD Capacity | 10TB per HDD |
| Operating Humidity | 10% to 90% (non-condensing) |
| IP Video Input | 16 Channel |
| Video Output | HDMI, VGA |
| Max Resolution | 12 MP |
| Audio Output | 1 channel |
| Decoding Format | H.265/H.264 |
| Recording Resolution | 12 MP (4000x3000) |
| Storage Capacity | Up to 10 TB capacity for each HDD |
| Network Interface | 1 x 10/100/1000 Mbps |
| Network Protocols | TCP/IP, DHCP, DNS, HTTP, UPnP |
| USB Interface | 2 x USB 2.0 |
| Alarm In/Out | 16/4 |
| Power Supply | 12V DC |
| Working Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Operating Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Working Humidity | 10% to 90% (non-condensing) |
Instructions for activating the device by setting an admin password for initial access.
Walks through essential initial device configurations like date, time, and network.
Steps to add network cameras, either manually or via automatic search.
Defining responses to alarms like full-screen monitoring or email notifications.
Setting up motion detection areas, sensitivity, and alarm responses.
Steps to resolve issues where the monitor shows no image after startup.
To Next Page