Need help?Do you have a question about the HIKVISION DS-7600NI-E1/A and is the answer not in the manual?
General| Model | DS-7600NI-E1/A |
|---|---|
| Category | Network Video Recorder |
| Channels | 16 |
| Two-Way Audio Input | Yes |
| USB Interface | 2 × USB 2.0 |
| Power Supply | 12V DC |
| Power Consumption | ≤ 10W |
| Operating Humidity | 10% to 90% |
| Video Output | HDMI, VGA |
| VGA Output Resolution | 1920 × 1080p /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz |
| Decoding Format | H.265/H.264 |
| Decoding Capability | 16 × 1080p @ 30fps |
| Audio Output | 1 channel, RCA (2.0Vp-p, 1kΩ) |
| SATA | 1 SATA interface |
| Max HDD Capacity | 6TB per HDD |
| Storage | 1 SATA interface |
| Network Interface | 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface |
| Operating Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| HDMI Output Resolution | 4K |
Provides instructions for safely powering the NVR on, off, and rebooting it correctly.
Guides users on setting a strong administrative password for initial device activation and security.
Explains the step-by-step process of the initial setup wizard for basic NVR configuration.
Guides users on activating, adding, and connecting IP cameras to the NVR system.
Explains how to customize and call presets, patrols, and patterns for PTZ cameras.
Details how to configure recording parameters like stream type, resolution, pre/post-record time.
Explains how to set up a recording schedule for cameras, including continuous and event recording.
Guides on setting up motion detection parameters and scheduling recordings triggered by motion.
Details how to configure recording triggered by alarm inputs and their handling actions.
Explains how to configure recording triggered by Video Content Analysis (VCA) events.
Introduces playback functions and covers instant playback and normal search methods.
Details methods for backing up recorded files using quick export, normal search, and event search.
Guides on configuring motion detection areas, sensitivity, and response actions.
Details how to handle external sensor alarms, including arming schedules and linkage actions.
Explains how to configure alarms and response actions for video loss detection.
Guides on setting up alarms and response actions for video tampering detection.
Covers how to configure handling for various system exceptions like HDD errors or network issues.
Details available alarm response actions like audible warnings, notifications, and output triggers.
Details the configuration and rules for face detection, including sensitivity and linkage actions.
Explains how to set up virtual lines for detecting objects crossing and configuring directionality.
Guides on configuring virtual regions for detecting intrusions, including threshold and sensitivity.
Details how to configure virtual regions for detecting objects entering a defined area.
Covers configuring essential network parameters like IP address, gateway, and DNS.
Guides on initializing hard disk drives (HDDs) before they can be used with the NVR.
Details the process of upgrading the NVR system firmware via local backup or FTP.
Offers solutions for common issues encountered with the NVR, such as no image or HDD errors.
To Next Page
