User Manual of All-in-One Network Video Recorder
155
13.4 Checking HDD Status
Purpose:
You may check the status of the installed HDDs on NVR so as to take immediate check and maintenance in case
of HDD failure.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the HDD Information interface.
Menu > HDD > General
2. Check the status of each HDD which is displayed on the list, as shown in Figure 13. 14.
Figure 13. 14 View HDD Status (1)
If the status of HDD is Normal, it works normally. If the status is Uninitialized or Abnormal, please initialize the
HDD before use. And if the HDD initialization is failed, please replace it with a new one.
Checking HDD Status in HDD Information Interface
Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
2. Click the HDD tab to view the status of each HDD displayed on the list, as shown in Figure 13. 15.
Figure 13. 15 View HDD Status (2)
To Next Page
Loading...
Need help?
General
