HIKVISION DS-7600NI-E1/A User Manual

User Manual of All-in-One Network Video Recorder
30
2.5 Operating LCD Menu
2.5.1 Configuring Displayer Parameters
Purpose:
You can press the buttons in front panel to adjust the displayer parameters, including picture mode, off time, on
time, OSD language, volume and restore factory default.
We take the example of adjusting picture mode to describe the operation.
Steps:
1. Press to enter LCD menu.
Picture Mode User
Off Time Off
On Time
Off
OSD Language
Volume
70
English
Restore Factory Default
Picture Mode User
Contrast 34
Brightness 50
Color 50
Sharpness 50
Figure 2. 17 LCD Menu
2. The cursor is positioning in the Picture Mode. Click to enter the Picture Mode sub-menu.
3. Press or to select the Picture Mode as User, Mild, Dynamic or Standard.
4. Press to positioning the cursor to Contrast.
Picture Mode User
Off Time Off
On Time
Off
OSD Language
Volume
70
English
Restore Factory Default
Picture Mode User
Contrast 34
Brightness 50
Color 50
Sharpness 50
Figure 2. 18 Adjusting Contrast Parameters
5. Press or to adjust the parameter.
6. Repeat the step 4 ~ 5 to adjust parameters for other items.
7. Press to save the settings and back to main menu.
8. Press to exit LCD menu.

HIKVISION DS-7600NI-E1/A Specifications

General

Brand	HIKVISION
Model	DS-7600NI-E1/A
Category	Network Hardware
Language	English