Need help?Do you have a question about the HIKVISION DS-7600NI Series and is the answer not in the manual?
General| Category | Network Video Recorder |
|---|---|
| Decoding Format | H.265+/H.265/H.264+/H.264 |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Max Outgoing Bandwidth | 80 Mbps |
| Network Interface | 1 x RJ45 10/100/1000 Mbps |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Operating Humidity | 10% to 90% (non-condensing) |
| Model | DS-7600NI |
| Channels | Up to 64 |
| Video Output | HDMI, VGA |
| Resolution | Up to 12 MP |
| Hard Drive Support | SATA |
| Max HDD Capacity | 6 TB |
| USB Interface | 2 x USB 2.0 |
| Operating Temperature | -10 °C to +55 °C (+14 °F to +131 °F) |
Provides essential procedures for safely powering the NVR on and off.
Guides users through the initial setup wizard for essential NVR configuration.
Explains the process of adding and connecting IP cameras to the NVR system.
Covers modifying camera parameters and setting custom protocols for compatibility.
Specific instructions for cameras connected via PoE interfaces on specific NVR models.
Instructions for cameras connected via built-in switch network interfaces on specific NVR models.
Details how to set up general parameters for PTZ camera control.
Covers configuring advanced PTZ camera movements like presets, patrols, and patterns.
Covers settings affecting image quality, stream types, and recording resolution.
Details how to set up recording schedules for cameras based on time and events.
Explains how to set up motion detection areas and trigger recording based on movement.
Guides on configuring recording triggered by external alarm inputs.
Explains how to initiate manual recording independent of schedules or events.
Covers setting up specific recording schedules for holidays.
Details enabling redundant recording for enhanced data safety and reliability.
Explains how to group HDDs and assign channels for recording to specific groups.
Explains how to search and play back recorded video files from the NVR.
Details various methods for backing up recorded video files.
Explains the quick export function for fast backup of record files.
Guides on backing up files found through normal video search.
Details backing up event-related record files using event search.
Explains how to export specific video clips during playback.
Explains how to configure motion detection zones, sensitivity, and alarm actions.
Details configuring external sensor alarms and their response actions.
Covers setting up alarms and response actions for detected video loss on channels.
Explains how to configure alarms and response actions for video tampering events.
Details how to configure handling methods for various system exceptions like HDD errors.
Covers configuring actions like full screen monitoring, audio warnings, and email notifications for alarms.
Covers basic network settings like IP address, gateway, and DNS.
Provides steps for initializing newly installed Hard Disk Drives for NVR use.
Covers adding and managing Network Attached Storage (NAS) or IP SAN disks.
Explains how to manage HDDs by grouping them for organized storage.
Covers allocating specific storage quotas for recorded files per camera.
Details using S.M.A.R.T. and Bad Sector Detection for HDD health monitoring.
Offers solutions for common problems encountered with the NVR and its components.
To Next Page