Need help?Do you have a question about the HIKVISION DS-7600NXI-K1 Series and is the answer not in the manual?
General| Brand | HIKVISION |
|---|---|
| Model | DS-7600NXI-K1 Series |
| Category | Network Hardware |
| Language | English |
Provides instructions for using and managing the product, subject to change without notice.
States Hikvision's warranty limitations, liability, and user responsibilities regarding product use and security risks.
Details FCC compliance, potential interference, and corrective measures for Class A digital devices.
Confirms product compliance with harmonized European standards and WEEE directive for recycling.
Guides users through the initial activation process by setting an admin password for the video recorder.
Explains how to log into the device using either an unlock pattern or a password.
Introduces the Graphical User Interface (GUI) for live view, including shortcut menus and icons.
Covers the control of Pan, Tilt, and Zoom (PTZ) cameras, including parameter configuration.
Introduces the playback interface, including timeline controls and playback buttons.
Details how to play back recorded normal videos, select cameras, and navigate dates.
Covers basic system settings like output resolution, system time, and user management.
Covers network settings, including DHCP, DNS, and Hik-Connect setup.
Covers adding, configuring, and managing network cameras connected to the NVR.
Covers settings related to managing video recording, including storage devices and schedules.
Explains how to initialize HDDs and add network disks for video storage.
Covers advanced system settings including language, resolution, and enhanced SVC mode.
Details advanced live view configurations like window division, auto-switch interval, and audio settings.
Covers advanced network configurations including TCP/IP, DDNS, and NAT.
Covers advanced camera management, including adding cameras via IP channel and PoE.
Covers configuration for various event types, including normal events like motion and video tampering.
Covers perimeter protection features like line crossing, intrusion, and region detection.
Covers facial recognition setup, including face capture and comparison.
Covers managing recording schedules, parameters, and storage devices.
Guides on restoring device settings to simple, factory defaults, or inactive status.
Allows selection of events to display hints in the alarm center.
Introduces accessing the video recorder via a web browser and required components.
Details the process of logging into the web interface using IP address, username, and password.
Provides definitions for technical terms used in the manual, such as Dual-Stream, DVR, and HDD.
To Next Page