HIKVISION DS-7600NXI-K1 Series - Face Picture Library Management

Network Video Recorder User Manual
71
6.4.7 Face Picture Library Management
Face picture library is mainly used for face picture storage and face picture comparison.
Note
The section is only available for certain models.
Add a Face Picture Library
Face picture library is used to store face pictures, it is essential for face picture comparison.
Steps
1. Go to Configuration → Face Picture Library.
2. Enter the admin password for authorization.
3. Click Add.
4. Enter the face picture library name.
5. Click Add.
What to do next
After a face picture library is added, you can edit its name, delete it, or upload face pictures to it.
Upload Face Pictures to the Library
You can upload a single face picture or import multiple face pictures to the library.
Before You Start
Ensure you have created a face picture library and enabled face picture comparison.
Steps
1. Go to Configuration → Face Picture Library.
2. Find the face picture library that you are going to upload face pictures, and click .
3. Click Add.
4. Import picture(s).
Add one face picture to the library.
Add multiple face pictures to the library.
Note
● Only JPG and JPEG formats are supported.
● Each picture size should be less than 1 MB.
● The picture resolution shall be between 80 × 80 and 1920 × 1080.