Need help?Do you have a question about the HIKVISION DS-7608NI-Q1 and is the answer not in the manual?
General| Two-way talk | Yes |
|---|---|
| Input bandwidth | 80 Mbit/s |
| Number of users | 64 user(s) |
| Maximum resolution | 4096 x 2160 pixels |
| Video input channels | 8 channels |
| Supported resolutions | 4096 x 2160, 3840 x 2160, 2560 x 1440, 1920 x 1080, 1600 x 1200, 1280 x 1024, 1280 x 720 |
| Audio formats supported | G.711 A-law, G.711 μ-law, G.726 |
| Video formats supported | H.264, H.264+, H.265, H.265+, MPEG4 |
| Wi-Fi | No |
| HDD capacity | - GB |
| HDD interface | SATA |
| Maximum storage capacity | 8 TB |
| Number of HDDs installed | 0 |
| Number of HDDs supported | 1 |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Supported network protocols | TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP, HTTP, HTTPS |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Output voltage | 12 V |
| Power consumption (typical) | 10 W |
| Certification | FCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: |
| Product color | Black |
| Rack capacity | 1U |
Weight and Dimensions| Depth | 240 mm |
|---|---|
| Width | 320 mm |
| Height | 48 mm |
| Weight | 1000 g |
Guides through powering on, shutting down, and activating the NVR with a password.
Outlines the setup wizard steps for initial NVR configuration.
Explains how to activate, add, and manage IP cameras for the NVR.
Covers various functions and controls available during live view.
Guides on setting up parameters for PTZ camera control.
Explains how to customize and call PTZ presets, patrols, and patterns.
Covers setting image quality, stream type, and resolution for recording.
Guides on setting up schedules for continuous, event, or motion-triggered recording.
Details setting up motion detection areas and triggers for recording.
Explains how to configure recording based on alarm input events.
Covers setting up recording triggered by Video Content Analysis events.
Explains methods for playing back recorded video files.
Guides on exporting record files to backup devices using various methods.
Configures motion detection sensitivity, areas, and trigger actions.
Defines system actions like event hints, full-screen monitoring, and notifications for alarms.
Configures face detection rules, sensitivity, and actions.
Sets up virtual lines for detecting objects crossing in specific directions.
Configures virtual regions for detecting unauthorized entry or loitering.
Detects objects entering a defined virtual region.
Detects objects exiting a defined virtual region.
Allows searching for captured face images and their associated video.
Sets basic network parameters like IP address, gateway, and DNS.
Guides on preparing new HDDs for use by initializing them.
Details how to upgrade the NVR firmware using local devices or FTP.
Offers solutions for common issues like no image, HDD errors, and connectivity problems.
To Next Page
